Dryer mine production of "Agropolus" is intended for drying grain, cereal, oilseed, legumes, way discharge of heated air to the treated product.

Produced using laser cutting and bending on the computer high-tech equipment, which significantly improves the quality of manufactured products.

Dryer runs in 3 versions:

• with integrated cooling zone;
• the possibility of using the dryer in the flow regime;
• applied continental drying mode.

Technical characteristics of the dryer with the heat source GTP-2.0

Name of parameters and sizes	Norm
	SAR - 52	SAR - 45	SAR - 37	SAR - 30	SAR - 23	SAR - 16
Performance theoretical scheduled t/h	52.3	45.0	37.7	30.4	23.1	15.7
Number of mines	2
The number of sections in the mine	6	5	4	3	2	1
Dimensions shaft sections mm, not more than
Width	945
Length	5000
Height	2500
Loading capacity m3	65.6	56.3	47.2	38.0	28.9	19.7
Number of rows of boxes in the mine, NY	72	60	48	36	24	12
The number of boxes in each row of the mine, NY	13 and 11
Mark and number of fan	VTS 4-76 number 12.5	VTS 4-76 number 12.5	VTS 4-76 number 12.5	VTS 4-76 number 8	VTS 4-76 number 12.5	VTS 4-76 number 8
Installed capacity, kW	37.5	18.5	45	22	18.5	22
Fan speed, rev / s-1, at least	1000	1000	1000	1500	1000	1500
Fan capacity, m3/h, not less	53000	42000	58000	25000	42000	25000
The number of fans, pc	2	2	1	2	1	1
The total pressure in Pa	1480	1000	1700	1800	1000	1800
Overall dimensions, mm
Length	6000
Width	3500
Height	19600	17100	14600	12100	9600	7100
Weight, kg	13500	11750	10000	10000	8250	4750

Performance is for the following drying temperature of 90 ⁰C for wheat, at an ambient temperature above 15 ⁰C, humidity 70%. Removal of moisture is 5%.

Advantages.

The main advantage of the dryer "Agropolus" is a production of hot air heat source that uses fossil fuels. This can be pellets, waste wood processing industry (sawdust, shavings, etc..), As well as waste processing of crops (sunflower husk, husks, etc.).

With this in connection with the increase in gas prices, fuel oil, diesel fuel, electricity buying our grain dryer you get substantial savings in your business by reducing the cost of expensive energy, so some of them can be accumulated from the waste products of the enterprise.

Also indisputable advantage of our dryer is innovative and design solutions that have been implemented by our engineers in the design, as well as reliable, high-quality materials used in the manufacture. This provides longer and more effective operation of the equipment for large volume production of the final product.

Designing dryers.

Our company has long been successfully cooperating with leading design institutes and firms specializing in the design of facilities for agricultural enterprises. Highly qualified specialists will draft the dryer, which will fully meet the requirements of your production with minimal time and finances.

Installation of the dryer.

All construction and installation work carried out by specialists of "Agropolus." These include site preparation, pouring the foundation, erection of structures directly dryers, equipment installation, construction of access roads and households buildings, connect the power unit to power sources, the integration of instrumentation into a single automatic control system of technological production (APCS).

Pre-commissioning works.

We will spend the whole list of commissioning works and the works connected with the introduction of the facility. Our company also carries out training facility operators to work with the main aggregates of dryers and their repair.

Dryers sales service.

At customer specialists of "Agropolus" conduct a full service and repair construction dryers, as well as all of its units.