Manufacture and installation of grain drying, thermal equipment.

Repair, installation, construction and maintenance of agricultural enterprises.

Dryers modular SPM

SPM modular grain dryer is designed to remove excess moisture from the different grain crops by feeding the heated air to a predetermined temperature which flows perforated walls.

The principle of operation of modular dryers.

Filling auger located at the top of loads of grain to column one after the other, and the fan delivers air into the chamber, further be divided by two threads. One burner is warmed and fed to the second mixing chamber. The chamber mixing hot and cold flow again mixed using reflectors. This allows to adjust and to ensure stable operation, and the same temperature in all regions of the drying chamber.

At the bottom of the mechanism is located, consisting of a rotating shaft, which regulates residence time of the product in the column and thereby providing an optimum drying mode.

Unloading of grain is performed by means of conveyors or augers mounted at columns which is a grain.

Schematic diagram of the operation of the dryer module.

Specifications dryers modular SPM.

Name of parameters and sizes

Units of measurement

Norm

C3M-3

C3M-6

C3M-10

C3M-16

C3M-30

C3M-40

C3M-50

Planned Performance *

t / h

3

6

10

16

30

40

50

Loading capacity of the drying chamber

m3

4.5

9

14

18

40

68

-

Power consumption, not more

kW

25.5

31

49.5

65.0

92.4

135

145

Specific fuel consumption **

 

Diesel fuel

kg / m%

1.0

Natural gas

m3/ Sq.t

1.33

Weight

t

3.5

4.6

6.5

8.5

13

18

19

* Capacity is given for wheat. Removing the moisture from 20% to 14%.

** When dried food grains.

The advantages of modular dryers SPM.

The advantages of modular dryers should include the following:

  • low investment costs for the purchase, installation and servicing;
  • ease of maintenance;
  • the ability to add additional modules to increase productivity;
  • ability to work both on traditional and alternative fuels.

Heat generator for SPM dryers.

Dryer SPM can be equipped with heat source, runs on both traditional fuels (natural gas, propane / butane, furnace fuel oil), as well as solid fuel heat source , the fuel for which can be pellets, briquettes, firewood, sawdust, various vegetable waste from agriculture ( straw, sunflower husk and so on. d.).