Manufacture and installation of grain drying, thermal equipment.

Repair, installation, construction and maintenance of agricultural enterprises.

Air heat exchanger TV

Air heat exchanger manufactured by "Agropolus" is intended to obtain a high temperature air in large volumes.

The heat exchanger is an intermediate between the heat source equipment running on biofuels and a fan, which is used in the processing chain equipment.

Applying our heat away from the heated air to obtain the desired temperature (not exceeding 120 0C), and the flue gases and combustion products will not come into contact with the air to be heated.

Usually this type of air heat exchangers designed for:

  • drying grain with/crops (wheat, corn, soy, sunflower, etc.);
  • manufacturing processes for drying of wood;
  • provide heating large technological platforms (greenhouses, various shops, poultry, hangars);
  • in the production of pellets, briquettes, and so on.

The heat exchanger works with all types of organic fuel (waste wood processing industries, as well as agricultural products - waste grain, sunflower husks, hulls, and so on). Transition to new fuels will significantly reduce production costs, so as the share of energy in it significantly reduced. This gives us apply our heat exchanger financial advantage over its competitors.

Possible arrangement of the heat exchanger torch companies "Ekoflem", "UNIGAS", "Oilon", "Cuenod", "Buderus Logatop", "LAMBORGHINI caloreclima", "Max Weishaupt GmbH", "Babcock Wanson", "Ognemash", "Oroflam" and so on. d. This will be called a heat exchanger heat generator powered by liquefied and natural gas or diesel fuel.

Through the use of heat-resistant steel from European manufacturers increased significantly temperature readings heating of the working surface of the heat exchanger, which has a positive effect on the efficiency of the plant, and made it possible to significantly reduce fuel consumption and increase the lifetime of the equipment.

Automatic ash removal system has made it possible to significantly reduce the amount of time and routine maintenance, as well as cycles of stop/start the unit, which has a positive impact on the life of the equipment.

To avoid overheating of the working surface of the bulb removal heat exchanger temperature sensor is provided, which is integrated in PCS heat generator.

Specifications.

Air heat exchanger, working together with the solid heat source:

Parameter name
and (or) size

The norm for the types of

TV 4.2

6,9-TV

TV 8.3

TV 11.1

TV 13.9

TV 16.7

Nominal air flow blower m3/s at most

4.16

6.94

8.33

11.11

13.88

16.66

The air temperature at the outlet of the heat exchanger at nominal air flow, 0C, no more

120

Primary air temperature, 0C, not higher

1000

Heat exchange area, m2, not more than

42

74

93

129

208

307

Footprint, m2, not more than

6.29

8.49

10.38

11.54

15.73

19.89

Dimensions, mm, not more than

Length

4250

4850

5550

5550

6750

7800

Width

1480

1750

1870

2080

2330

2550

Height

1660

2000

2150

2340

2610

2830

Weight, no more

1520

1900

2270

2670

2870

4420

The diameter of the outlet pipe of the exhaust gas mm, not more than

250

280

330

The diameter of the outlet of the heated air mm maximum,

500

600

700

800

900

1000

* Dimensions are without flue pipe.

Currently, engineers and designers of our company is developing water heat exchanger.

Getting Started.

The heat exchanger is installed on a flat surface of concrete or metal. Docking with the heat source is done by channel or heat resistant refractory tube. All joints must be airtight. Installation of the heat source and the heat exchanger should be removed from the other buildings at a safe distance (1 m), have good lighting.

In the vicinity should not be placed explosive (propane/methane cylinders, acetylene generators) and flammable substances (fuel depot). The room in which the heat exchanger is installed must be equipped with means smoke-preventing protection and ventilation, as well as the primary means of extinguishing (asbestos fiber, sand, fire extinguisher).

Maintenance.

For maintenance and operation of the heat source allowed workers aged 18 years that have passed the necessary training, coaching and received a certificate for admission to work.

To service the heat exchanger is permitted only with its full cooling (heating chamber temperature below 40 0C).

Maintenance is the timely removal of combustion products that accumulate in the heating chamber, and inspection of the external and internal surfaces of the unit for cracks, tears, burn-in sites.

It is strictly forbidden to repair the heat exchanger during operation.

In the event of a work, you must first stop the operation of the unit, wait for complete cooling and only after these procedures to start troubleshooting.

Is strictly prohibited without the heat exchanger of the load. Otherwise likely overheating structures of deformation and failure of the installation.

Shipping and delivery.

Shipment of the finished product is carried out to the full standard without packaging. Installation of additional modules according to customer design. We can deliver and install the product directly to your industrial site.